You may have already seen a number of examples of an indoor water wall. In the event that you have not you may want to take a look around. You may find that purchasing a pre-fabricated one is the best way to fill your blank wall with a indoor water wall. There is no better preparation when you want to fill your blank wall with a indoor water wall than knowing what you want. You can begin with pictures. Simply search the internet to get a good idea of what is available. In the case that you know how it looks you are ready to move on to the details.
You will need basically the same components to fill your blank wall with a indoor water wall regardless of the design you choose. One way to approach understanding this is to follow the flow of the water. Begin in the reservoir. This is an appropriately sized water-proof container at the base of the water wall. It will need to hold much of the water during operation and potentially all of the water when the water wall is not running.
The next necessity to fill your blank wall with a indoor water wall is tubing. You may want to include a filter on the tubing to protect your pump, but regardless you will need sufficient tubing to reach from the bottom to the top of your water wall.
Next you will need a pump. This is a choice that you may want to speak to knowledgeable individuals about. You may find that selecting a variable speed pump is a good idea. It will give you more control over the flow of the water.
Lastly you will need your water wall material. This is almost entirely a matter of taste. Some people prefer slate, copper, plexiglass, and a number of other materials. Fill your blank wall with a indoor water wall with a material that pleases you.
You may also need a frame of some sort. This can serve as a sturdy border to hold all the components together and in place.
You will need to keep in mind that your assembly must be waterproof. Beyond that the combinations and techniques are nearly limitless. Simply hide the tubing and pump, position the water wall material above the reservoir and run a length of tube to the top of the water wall.
That is pretty much all that is required to fill your blank wall with a indoor water wall. The remainder of the work is on refining your new water wall.
Water Flow and Appearance
You have found that to fill your blank wall with a water wall was not enough. Now you are ready to make it a great water wall. One of the first aspects to focus on is the flow of the water. You can use a small tray the width of your water wall to feed the water into and allow a sheet to trickle onto your water wall material. Another keen pointer is to adjust the speed to one that you find endearing.
If you notice any rough edges in your water wall smooth them. This is not limited to literal rough edges, but it can refer to them also. Consider adding lighting and other aesthetic elements to create an experience that you are glad to share.